95guy
New Member
Posts: 6
|
Post by 95guy on Jul 26, 2013 14:09:29 GMT -6
for a long time now it seems like my clutch lever is hard to pull in and it seems like it is slowly getting worse, what can I do to make it easier to pull?
|
|
|
Post by JeffsYFM350 on Jul 26, 2013 14:50:22 GMT -6
Do the raptor set up there is some guys that have it here..
|
|
|
Post by MudBug on Jul 26, 2013 16:00:00 GMT -6
Do the raptor set up there is some guys that have it here.. x2 best dollar for dollar mod you can do to a warrior!
|
|
95guy
New Member
Posts: 6
|
Post by 95guy on Jul 26, 2013 16:19:16 GMT -6
How do you do the Raptor set up?
|
|
|
Post by Goody's Atv on Jul 26, 2013 16:28:11 GMT -6
Use a raptor setup with good motion pro cable and lengthen the little arm down by the little cover a bit
|
|
|
Post by MudBug on Jul 26, 2013 18:16:18 GMT -6
Use all the raptor 350 clutch release parts. It cost me less then $40 to do it and I can pull my clutch with one finger now.
|
|
|
Post by lbjamm on Jul 30, 2013 1:40:29 GMT -6
Yeah, I have it. WAY better!
|
|
|
Post by wv98yfm350 on Jul 30, 2013 9:16:55 GMT -6
Agree 10x over with above comments. I half assed it and didn't get the new arm I bought motionpro cable and turned the warrior arm upside down to save on parts and its still like a whole new bike and I have HD clutch springs, pulls like butter!
|
|
|
Post by Lycan on Jul 30, 2013 10:29:01 GMT -6
Best $40 I spent on my bike! I even burned the stupid cable and it's still easier than stock. That reminds me, I need a new cable.....it never ends.
|
|