|
Post by jrk5892 on Jun 20, 2013 13:21:03 GMT -6
figured i would share how i did my tail light see if it can help anyone out... picked up the lamp from ebay for $13 shipped: www.ebay.com/itm/Universal-Motorcycle-Bike-Atv-28-LED-Tail-Brake-Stop-License-Plate-Light-Smoke-/360629344655?pt=Motorcycles_Parts_Accessories&hash=item53f72f198f&vxp=mtrthen took some scrap alum and traced out the shape i wanted to cut for the mount. i started by drilling a hole in the stock so that i could get the wires though, then put the lamp on the piece and traced it and marked for the mount holes from there cut it out with a grinder, and smooth the edges with a file and belt sander then mark for the bend... i drilled 3 holes 1 is already on the back of the quad, the other 2 i made a bit smaller so that i can run rivits in there to keep it from spinning and help secure it nice and tight! hit it with some texture black powder all done!
|
|