|
Post by MudBug on Jun 28, 2013 20:33:07 GMT -6
Just ordered my new ALL BALLS swing arm and steering stem as well as a new motion pro clutch cable. Also just dropped the frame and swing arm off to be powder coated. Should have it back by the end of the week.
|
|
|
Post by JeffsYFM350 on Jul 2, 2013 10:30:04 GMT -6
Sweeeeet!!
|
|
|
Post by MudBug on Jul 2, 2013 15:34:49 GMT -6
well I received my Specbolt fastener kit yesterday, I tore the motor all the way down and changed out all the seal and replaced some of the bolts in the engine and polished up some of the heads on the bolts that I didnt replace. All black motor with polished bolts looks pretty good I think. Today my ESR intake came in along with the big bore intake boot for my carb, reed spacer, and petcock. Axle should be here tomorrow and in the next few days the bearing kits, clutch cable, PRM wide grab bar, and my new welding lead should start showing up I hope. I was looking over my expansion chamber and found a nice big crack on the inside of where the hanger is welded so I'm going to re-weld it "shouldnt" be a problem.
|
|
|
Post by JeffsYFM350 on Jul 2, 2013 16:16:39 GMT -6
She will be going in no time!!
|
|
|
Post by gen1pat on Jul 2, 2013 16:45:25 GMT -6
If you were smart, like me, you'd have stayed single so you can spend all your money on whatever you want. Without any back talk;)
|
|
|
Post by MudBug on Jul 2, 2013 18:09:06 GMT -6
If you were smart, like me, you'd have stayed single so you can spend all your money on whatever you want. Without any back talk;) hahahah nah man she is a very cool ckick. I wouldnt trade her for the world.
|
|
|
Post by MudBug on Jul 6, 2013 12:04:41 GMT -6
Got the durablue +2 +4 today. Also got my motion pro clutch cable and my swinger bearing kit.
|
|
|
Post by JeffsYFM350 on Jul 6, 2013 12:29:33 GMT -6
Sweet Levi..Get her together and take her for a ride lol..
|
|
|
Post by MudBug on Jul 6, 2013 14:11:34 GMT -6
Sweet Levi..Get her together and take her for a ride lol.. Gotta get the frame and swinger back first. Then I'm all over it!
|
|
|
Post by JeffsYFM350 on Jul 6, 2013 17:06:42 GMT -6
Lmao I hear ya there!!
|
|
|
Post by MudBug on Jul 8, 2013 20:10:39 GMT -6
|
|
|
Post by JeffsYFM350 on Jul 9, 2013 6:11:06 GMT -6
Sweet! A little elbow grease there polishing really pays off! looks good Levi..
|
|
|
Post by MudBug on Jul 9, 2013 8:58:55 GMT -6
Sweet! A little elbow grease there polishing really pays off! looks good Levi.. Thanks man and I just bought some Mothers metal polish with some shit in it to protect the polished metal so I hope it works well.
|
|
|
Post by JeffsYFM350 on Jul 9, 2013 14:00:48 GMT -6
Yea that shit works wonders!
|
|
|
Post by MudBug on Jul 9, 2013 16:06:59 GMT -6
I don't think any polish on the market is better then the Hoosier polish Josh sent me! That shit is amazing!!!! But I need something to protect my hard work lol!
|
|