|
Post by MudBug on May 23, 2013 21:01:14 GMT -6
|
|
|
Post by gen1pat on May 23, 2013 21:12:56 GMT -6
Wow she is pretty clean. I'm still jealous Lol. I love the ass on that bitch! HONDA power! Sorry guys, I still bleed some Honda red! lol
|
|
|
Post by MudBug on May 23, 2013 21:25:08 GMT -6
thanks man! i look at it this way blood is blue till it hits air then its all red!!!
|
|
|
Post by MudBug on May 24, 2013 22:00:31 GMT -6
Brakes are on their way, along with a new Swing arm pivot. Bearings are all tight in the swinger so no worries there chain is brand new just needs to be lubed, sprockets are new, I hopefully will find some time this weekend to go through the harness get it on and check spark. If I have it, it should run. Going to figure out and airbox and filter set-up clean the carb and run it.
|
|
|
Post by MudBug on May 25, 2013 20:11:51 GMT -6
Ordered the expansion chamber springs, and won the bid on a nice gold brake lever this morning. So i have aprt on the way and I couldnt be happier. I need to find the time to get it running but its not going to happen this weekend maybe later this week.
|
|
|
Post by MudBug on May 26, 2013 6:49:23 GMT -6
thats all original the wayi wanna keep mine for the most part.
|
|
|
Post by Bones on May 26, 2013 8:14:53 GMT -6
|
|
|
Post by MudBug on May 26, 2013 17:06:14 GMT -6
Its a good deal but shipping is killer!!!
|
|
|
Post by gen1pat on May 26, 2013 19:38:29 GMT -6
God I love the R. You have to be a totall scmuck to not like them.
|
|
|
Post by MudBug on May 26, 2013 20:03:51 GMT -6
God I love the R. You have to be a totall scmuck to not like them. Hahaha!!!! Sent from my ADR6400L using proboards
|
|
|
Post by MudBug on May 28, 2013 19:50:46 GMT -6
working on alittle clean up for our favorite Canuk! hahaha what do you think Bones? there is a little life under there need some more sand paper and some plastic polish, They should shine up nice i think.
|
|
|
Post by Bones on May 28, 2013 23:07:01 GMT -6
sand, heat, polish ... they'll come back its looking good tho
|
|
|
Post by MudBug on May 29, 2013 14:36:25 GMT -6
sand, heat, polish ... they'll come back its looking good tho Ya i gotta find a heat gun some time soon to wirk them a bit more and grab some more sandpaper and polish. I just did a quick sand job to see how deep the oxidation was and its pretty deep but should come out nice i think.
|
|
|
Post by lbjamm on May 29, 2013 20:41:08 GMT -6
Sweet bike man. Those things are killer fun.
|
|
|
Post by MudBug on Jun 2, 2013 16:38:13 GMT -6
okay i have some parts coming in now. All the brake parts are just about in. New axle pivot bolt is in, Case Saver, shift lever, ignition coil and brake stay are on the way. I ohm'd everything out and the only thing out of spec was the secondary coil. The plug cap was broken and not making contact with the plug wire so I ordered a new one to start fresh. I'm getting close to firing it up for the first time. Still working on the plastics they are coming out pretty well.
|
|