|
Post by Bones on Apr 21, 2013 18:11:27 GMT -6
ture ... i think they might need a rebuild .... here is a pic of my pegs (go ahead and drool boys)
|
|
|
Post by 94warpig on Apr 21, 2013 18:12:24 GMT -6
Good point! Those pegs are bad ass
|
|
|
Post by gen1pat on Apr 21, 2013 19:00:44 GMT -6
Yeah they are way to short. If you need me to get the measurement from the ground to the center of the lower a arm bolt, from mine I can do that.
|
|
|
Post by Bones on Apr 28, 2013 17:50:49 GMT -6
Yeah they are way to short. If you need me to get the measurement from the ground to the center of the lower a arm bolt, from mine I can do that. hey i stiffened up the shocks and measured form the ground to the center of the a arm bolt its 8 1/4 - 8 3/8 (on flat fronts).... can you check yours? and let me know man ..... i also got the bearclaws back on it, and i weighed the B.C.'s on 660r rims and they are 26 lbs each (rear)
|
|
|
Post by gen1pat on Apr 29, 2013 16:48:03 GMT -6
I just rechecked my build thread, and, I came up with 11 & 7/8. That was without bodywork, handle bars, exhuast, etc... Just the complete roller w/engine. I'd say, all complete, about 11.5".
|
|
|
Post by Alex on Apr 29, 2013 16:56:49 GMT -6
Mine is at 12.5 with stock arms LOL!
|
|
|
Post by gen1pat on Apr 29, 2013 17:09:39 GMT -6
But, you are running SHEE shocks. You are much taller then if the stockers were on there.
|
|
|
Post by Bones on Apr 29, 2013 17:33:11 GMT -6
im willing to beat airing up my tires will bring it to 10 or 11 .... thank for the info guys i'll throw the wifes fronts on it (mine dont hold air) this weekend and recheck it
|
|
|
Post by Bones on Apr 29, 2013 17:51:58 GMT -6
mocked up the yfz bumper .... i have 2 6inch PIAA's that will be going where the stockers were
|
|
|
Post by MudBug on May 1, 2013 12:33:56 GMT -6
That will look pretty cool when its done man. Those are some big ass lights.
Sent from my ADR6400L using proboards
|
|
|
Post by Goody's Atv on May 1, 2013 12:41:37 GMT -6
Sick
|
|
|
Post by bkroll84 on May 2, 2013 4:38:53 GMT -6
looking good man! I see one problem looks like your lower a arms are facing wrong way you will destroy those mounts if you keep them like that (imo)
|
|
|
Post by Bones on May 2, 2013 12:08:18 GMT -6
got my yfz tie rods today (thanks beastly) ... i get those on this weekend
Bk what are you talking about man (you know these are custom made right) ? plz explain ...and nothing in the front end is tight right now its just mock up ... as i need a set of 2nd bushing cuz 1st gens dont fit in the lowers
|
|
|
Post by bkroll84 on May 2, 2013 13:06:15 GMT -6
in your pic looks like bottom shock mounts are below a arm I realize they are custom I was just pointing it out looked like a snag point to me
|
|
|
Post by Bones on May 2, 2013 13:10:13 GMT -6
oh ok yeah thats how they were designed
|
|