|
Post by YamaHauler on Apr 20, 2013 18:58:02 GMT -6
Damn $27 free ship wish I new for sure if it would work It would need a carrier and I suppose those are spendy
|
|
|
Post by Bones on Apr 20, 2013 19:19:10 GMT -6
you could resell it.... if it doesnt
|
|
|
Post by YamaHauler on Apr 20, 2013 19:48:38 GMT -6
what kind of carrier would it need? and I suppose I would need a 700 axle too
|
|
|
Post by Bones on Apr 20, 2013 20:16:07 GMT -6
my thoughts are everything
|
|
|
Post by 2kwarr on Apr 21, 2013 7:38:42 GMT -6
When i made my swingarm I used chopped up a stocker for the head tube and got the rear round carrier mount from jjandaracing.com/contents/en-us/d15.html then i bought the lonestar carrier off ebay for 150 so it cost me about 230 for parts and materials.
|
|
|
Post by gen1pat on Apr 21, 2013 8:04:31 GMT -6
There is a good build thread a guy on 3WW did when adapting a trx450r swinger to a atc350x.
|
|
|
Post by gen1pat on Apr 21, 2013 8:06:31 GMT -6
When i made my swingarm I used chopped up a stocker for the head tube and got the rear round carrier mount from jjandaracing.com/contents/en-us/d15.html then i bought the lonestar carrier off ebay for 150 so it cost me about 230 for parts and materials. That is pretty much what Scott did. I'm probably going to do my own once I get my 2nd spare frame home. I will have 3 extra swingers at that point.
|
|
|
Post by Bones on Apr 21, 2013 8:06:43 GMT -6
There is a good build thread a guy on 3WW did when adapting a trx450r swinger to a atc350x. there is a link to it on post 1
|
|
|
Post by gen1pat on Apr 21, 2013 8:18:54 GMT -6
I missed that ne. I saw the TRI-Z link thought. I wanna check that one out. I'd rather build my own thought. That way I an get the length I want, which is +2 1st gen. Love it!
|
|
|
Post by Bones on Apr 21, 2013 8:28:15 GMT -6
oh my bad it is the tri-z one in post 1 find the link and i'll it how
|
|
|
Post by gen1pat on Apr 21, 2013 8:46:19 GMT -6
Can't find it.
|
|
|
Post by Bones on Apr 24, 2015 17:26:43 GMT -6
|
|
|
Post by Warrior1996 on Apr 24, 2015 17:36:45 GMT -6
Some helpful info here. Was planning on running a trx450r swinger on the xt600 build. Maybe a 700 now that I see the measurements.
|
|
|
Post by Bones on Apr 24, 2015 17:52:01 GMT -6
yeah man it looks like it might just bolt right up... but i havent gotten my hand one to test it yet and im still not sure what link would be needed to make it all work right
|
|
|
Post by Bones on Apr 24, 2015 17:55:28 GMT -6
|
|