|
Post by YamaHauler on May 18, 2013 12:57:23 GMT -6
|
|
|
Post by YamaHauler on May 18, 2013 13:03:28 GMT -6
Just a few more things like stretched stem & bars,tie rods & alignment,front brakes,belly skid and rear shock then #5 will be ready for engine break in and after that comes the FCR and custom DRW intake!
|
|
|
Post by YamaHauler on May 18, 2013 20:20:18 GMT -6
Front YFZ 450 calipers and steel braided lines installed 46" 47.75"
|
|
|
Post by YamaHauler on May 19, 2013 23:14:53 GMT -6
Figured I'd get my MOD sheet up while everything is still fresh in my mind
Chassis | Suspension | Controls
Frame:Stock/Custom paint by Todd A Arms: +2 ASR arms and Tie rods/custom paint by Todd Swingarm:Stock/Custom paint by Todd Steering Stem:Stock Stretched 2" Stabilizer:NA Axle:Stock (for now) Carrier:Stock/Custom paint by Todd Locknut:stock Hubs F|R:Stock/Stock Bars:MSR Eliminators Throttle/Clutch Lever:Stock/03 R1 clutch perch with anodized blue custom lever Grips:PROGRIPS Nerfs:Tusk OFF-ROAD Pegs:Stock double wides Bumper:FULLFLIGHT solid aluminum racing bumper Grab Bar:Armadillo six pack rack Front Shocks:04 Banshee's Rear Shock:01 660 Raptor brakes:06 YFZ 450 Calipers F/R Brake Pads:Stock YFZ Brake Lines:Steel braided Rotors F|R:stock/Moose Racing Rims F|R:ITP/Blue label Douglas Tires F|R:21-7-10 RAZR's/22-11-10 HOLESHOT XCT
Body
Plastic:Stock DRW cut fronts & custom Hood scoop Graphics|Seat Cover:Stock Number Backgrounds:NA Handguards:RB MX Bar Pad:MSR Fuel Tank:Stock Skids plates:Custom Diamond plate belly skid/DG BAJA rear skid Lighting:18 Watt X2 LED's 1200 lumins/light
Engine|Drive System
Cylinder Head:Soon to be P&P Gaskets:Tusk Piston:Wiseco 10.25:1 set deck height so Comp should be right around 10.75:1 Cam|Valves Springs:S1HC/Stock Bore & Stroke:84mm/Stock Displacement:357 Carburetor:39mm FCR with custom DRW Track Special intake Spark plug:NGK Iridium IX DR8EAIX Stator:Stock Shifter:YZ250F Air Filter|Box:K&N/no box Header|Silencer:Torque header/fully wrapped/HMF Performance series/mid pipe wrapped Clutch|Plates|Springs:Tusk HD Gearing F|R:14/40 Chain:RK X-ring Gold series CDI|Killswitch:Stock/stock Cooling:Air with custom clutch cover oil cooler mod/Aluminum Air scoops Other: Custom 1 off DRW Case Saver/DRW swing arm chain roller,Vito's +4 timing advance key/Raptor 350 Clutch mod/Anadized blue Billit gas cap/TM Designworks lower roller/All Balls bearings all around And lots more to come!
|
|
|
Post by YamaHauler on May 20, 2013 22:36:13 GMT -6
Well took #5 for a cruse around the yard yesterday and had and issue with 1st gear the shift lever kept hanging up so decided to operate and tipped him on his side to remove clutch cover and this is what I found the shift linkage was catching on the pin holding the wheel here is video of how much play the lever with the wheel had in it s730.photobucket.com/user/SpecVster/media/video-2013-05-19-21-26-04.mp4.htmlreplaced it with the one from my spare motor and problem solved shifts like it should Thank god it was an easy fix!! other than this little snag she runs great and really strong sounds mean as hell and I couldn't be happier got my 01 660 shock back from the shop today with a fresh charge so I will be installing that tomorrow and have a little fine tuning to do with the carb and work on finishing out the break in before introducing the FCR and track special DRW intake to finally put some power to the wheels and start riding! quick video of the test ride in the yard today s730.photobucket.com/user/SpecVster/media/VID-20130520-WA0000.mp4.html
|
|
|
Post by YamaHauler on May 22, 2013 20:58:18 GMT -6
gonna try to snap a few shots of #5 tomorrow it's at about 98% complete still debating on putting the nerfs on or not what do you guys think???
|
|
|
Post by Goody's Atv on May 22, 2013 21:07:04 GMT -6
Id put them on
|
|
|
Post by Alex on May 22, 2013 21:22:22 GMT -6
Put em on
|
|
|
Post by MudBug on May 22, 2013 22:04:13 GMT -6
Put them on
Sent from my ADR6400L using proboards
|
|
|
Post by YamaHauler on May 23, 2013 17:09:08 GMT -6
they are on!!!lol
|
|
|
Post by YamaHauler on May 23, 2013 18:26:21 GMT -6
|
|
|
Post by midwayusa on May 23, 2013 18:50:12 GMT -6
Too nice to go get dirty!!
|
|
|
Post by YamaHauler on May 23, 2013 18:59:33 GMT -6
Nah it'll be getting plenty dirty this Saturday
|
|
|
Post by DuneRacerWeston on May 24, 2013 13:26:18 GMT -6
Looks great ed!
|
|
|
Post by YamaHauler on May 24, 2013 22:35:28 GMT -6
Thanks Weston
|
|